| Item |
Photo |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
1
more
pics |
 | Nice utility trailer, 53" wide, 100" long not including tongue, tongue is 44" long, the trailer has 24" side boards that are removable, 13" wheels, and a 1 7/8" ball. The trailer is in solid condition, wood is good, some minor rust on fenders and tongue. Lights work but one tail light is cracked. Good little work trailer.
|
24 |
13442 |
385.00 |
|
ended |
2
more
pics |
 | Roland percussion sound module TD-3. Measures approx 38" wide, 24" deep and 48" tall. The TD-3 Percussion Sound Module boasts 114 new, high-quality drum and percussion sounds arranged into 32 kits, plus an easy-to-use interface so you can start playing right away. The set is in good to very good condition and great working condition. Look at all pictures to see what is included with set.
|
15 |
15664 |
160.00 |
|
ended |
3
more
pics |
 | Casio brand keyboard with stand. Model CTK-720. Measures 37" wide and 32" tall. The CTK-720 includes 61 Full-Size, 32-Note Polyphony, 242 Tones, 100 Rhythms, 100 songs, LCD Display, Dual Speakers, Transpose and Tuning Function, General MIDI, USB Port, Microphone Input and Volume for Sing Along. Good to very good condition and great working condition
|
14 |
13442 |
51.00 |
|
ended |
4
more
pics |
 | Fender Stratocaster electric guitar. Original contour body patented on plate. Research has shown that we can not verify any part of this being authenticate. We do believe many components are Statocaster from Mexico. The neck does not look to be original. The guitar plays great and has great sound. The back plate is missing and many musician take that off to make it easier to change strings. One small chip on top of guitar arm. Includes a soft case. Stand NOT included.
|
8 |
14208 |
50.00 |
|
ended |
5
more
pics |
 | This is a very nice Fender Gemini II acoustic guitar with hard shell case. The guitar is 39" long overall and is in good to very good condition. You can see some minor wear on neck from being played. Excellent sound. Stand NOT included.
|
11 |
13172 |
76.00 |
|
ended |
6
more
pics |
 | Montana hand crafted guitar with soft case. Model number is MT104-N. Guitar stand NOT included. Does come with soft carrying case and is good condition, some wear on the neck from playing. 40" long overall.
|
11 |
10337 |
36.00 |
|
ended |
7
more
pics |
 | Small guitar amp by Rogue model G-10 and in good condition and great working condition. Measures 9"x6"x10".
|
10 |
13442 |
22.13 |
|
ended |
8
more
pics |
 | BC guitar amplifier. Model number GA10. Measures approx 10"x4"x11". In good condition and great working condition.
|
12 |
13442 |
22.13 |
|
ended |
9
more
pics |
 | Adjustable guitar stand with padded arms. In shortest position, it is approximately 24 tall. Fully extended, it is approximately 29 tall. In very good condition.
|
9 |
10337 |
13.00 |
|
ended |
10
more
pics |
 | Adjustable microphone stand. Seems to be in good used condition. Has a nice, chrome frame and rubber covered feet.
|
3 |
15376 |
5.00 |
|
ended |
11
more
pics |
 | Black adjustable microphone stand. It has one arm on it which can swing up or down. And the stand itself is adjustable in height. See pictures for details.
|
3 |
14524 |
6.00 |
|
ended |
12
more
pics |
 | Great items for any musicians. Includes two sets of drumsticks, one of which is Sound Percussion brand. Comes with a set of Behringer headphones and a set of cables. All seem to be in good condition
|
4 |
15664 |
5.00 |
|
ended |
13
more
pics |
 | Small, metal framed drummers stool. It is black and has a turquoise cushion on top. Has a couple small scratches on top. Overall good used condition. Measures 17" high. Folds up nicely.
|
1 |
14524 |
1.00 |
|
ended |
13A
more
pics |
 | Here we have a generator that has a Briggs and Stratton motor. Unfortunately, the carburetor is off of the generator but we have the carburetor, and it will need a rebuild kit, the needle valve is missing. The motor has very good compression. This large generator has two wheels on it for easier mobility. This is part of the Elite Series. Comes with an owners manual. See pictures for more details.
|
18 |
15664 |
130.00 |
|
ended |
14
more
pics |
 | Here we have a 1.7HP air compressor. This is a large one and seems to work great. Looks like trigger piece needs to be reattached. Features two wheels for easy mobility. It is a 26 gallon.
|
12 |
15759 |
75.00 |
|
ended |
14A
more
pics |
 | This is a nice Mercury 4HP outboard motor, with forward, neutral, and reverse control. Looks to be in good condition and has good compression, has not been started in about 1 year. Do not know age but it is a little older.
|
13 |
15763 |
195.00 |
|
ended |
14B
more
pics |
 | This is a set of Harley Davidson stock engine exhaust headers. They are DEM headers, stock for a 2009 to 2012 Harley Davidson Ultra Classic. They are in good condition and chrome is very good.
|
2 |
14102 |
4.00 |
|
ended |
15
more
pics |
 | Craftsman table saw. Has a guard on it to keep your boards straight while cutting. Also features a saw tilt gauge to adjust height on blade. Turned it on and it runs nice and smooth. Also has a shelf on the bottom for storage and has two wheels for easy mobility. Seems to be in good working condition. Measures approx 2.5' x 1.5' and is 3.5' tall.
|
7 |
12565 |
9.00 |
|
ended |
16
more
pics |
 | Venturi Forge , approximately 18 high by 22 wide by 18 deep. Comes with homemade wooden work bench that is approximately 41 high by 36 wide by 26 deep. Good condition.
|
6 |
10677 |
10.00 |
|
ended |
17
more
pics |
 | Lp Forge with forced air, on homemade wooden table with casters, kiln, approximately 63 high. Bench itself is approximately 38 high by 24 wide by 12 deep. Good condition.
|
2 |
13793 |
12.00 |
|
ended |
18
more
pics |
 | Five speed bench drill press by Central Machinery. Spindle speeds are 760-3070 RPM, table tilt is 45° left or right and spindle stroke is 2". Seems to work great, turned right on and has a light as well. Sits on a cabinet that has a couple shelves in it, and conviniently has a Central Forge clamp on the top part too. Get all this for one great price! Tabletop is approximately 16"x16" and machine and table is 63" tall.
|
11 |
15732 |
55.00 |
|
ended |
19
more
pics |
 | Enhance your ability to complete a wide variety of craft items with this hobby anvil. I believe it is made out of cast iron and sits on a sturdy wooden table and conviniently has a metal holder on the front for hammers and more. This is a sturdy piece. Measures 16"x10"x35" tall.
|
10 |
13269 |
57.00 |
|
ended |
20
more
pics |
 | Tradesman 4"x36" belt sander and disc sander. Variable speeds and uses a 6" disc. It is 3/4HP. It has been tested and turned on and starting right away.
|
7 |
15728 |
55.00 |
|
ended |
21
more
pics |
 | Here we have a Delta brand belt sander and disc sander. It is a 1/3 HP, 120V. Has a thin sanding belt which is 1" wide. Works great.
|
7 |
14894 |
55.00 |
|
ended |
22
more
pics |
 | Nicely built workbench on wheels. Easy to move around and comes with shelf underneath. Also has an attached heavy-duty bench grinder bolted on the end. Grinder is a Power-Kraft, it is 1/4HP. It is in good working condition. Table measures 48"x22" and is 37" tall.
|
6 |
15312 |
6.00 |
|
ended |
23
more
pics |
 | Nice welding setup. Chicago Electric Flux 125 MIG welder 110 volt. Comes with metal table that is approximately 37 high by 36 wide by 20 deep. You also get a nice size swivel base vise which is bolted to table. Vise is approximately 9 1/2 high by 16 wide, has 5 inch jaw. All in good condition.
|
7 |
13367 |
150.00 |
|
ended |
24
more
pics |
 | Great, bright red toolbox. Comes with removeable tray inside. Seems to be in good used condition. Comes with a couple items inside. Measures 21" long.
|
1 |
15572 |
1.00 |
|
ended |
25
more
pics |
 | Large, multi drawered, Craftsman toolbox. Drawers open and close nicely. Does not have a key included. In good used condition. Measures 26"x12"x 19".
|
8 |
14894 |
35.00 |
|
ended |
26
more
pics |
 | Moveable project center workshop bench. Its on wheels, contains three drawers and a storage spot underneath. Comes with pictured tools in drawers and on bottom. It has a cup holder, small compartments, a rack and extension cord reel all included. In used condition. Measures approx 34"x20" and 34" tall.
|
6 |
15759 |
11.51 |
|
ended |
27
more
pics |
 | Hitachi 10" compound saw. In decent used condition, starts up right away. Does NOT have a dust collection bag included. See pictures for all details.
|
8 |
15766 |
14.00 |
|
ended |
28
more
pics |
 | This Campbell Hausfeld air compressor can power a variety of tools and features a heavy-duty, maintenance free oilless pump. Has a user friendly control panel and 125 max psi. It is a 2HP and 8 gallons.
|
9 |
13497 |
33.04 |
|
ended |
29
more
pics |
 | WORX 10-in 8-Amp Corded Electric Pole Saw. When you need to tackle delimbing and small tree cutting, this Worx 8 amp corded electric pole saw offers consistent performance and power. The 10-in cutting bar makes this the perfect saw for all your light-duty cutting needs. The 8-ft extension pole installs without tools, (8 foot including the machine altogether), and increases your reach up to 13-ft high for overhead work. Features a safety button and works great.
|
12 |
15664 |
50.00 |
|
ended |
30
more
pics |
 | Earthwise 16 inch electric chain saw. It is a 12 amp. Includes bar and chain cover and a safety start button. Earthwise is the clean air choice." Also has oil level window. Tested and in great working condition.
|
11 |
12167 |
22.00 |
|
ended |
31
more
pics |
 | Weedeater brand hedge trimmer. This is electric and comes equipped with a safety guard on front and a safety button. Works great.
|
3 |
9020 |
3.00 |
|
ended |
32
more
pics |
 | Great, homemade wooden work bench. This consists of a top and bottom shelf. It is in used condition and has some stains on top, but hey, its for working on! Very sturdy, and measures 6'x2' and 3' tall.
|
3 |
15664 |
3.00 |
|
ended |
33
more
pics |
 | Here is a K'A'rcher pressure washer. It is max 1600 psi and 1.6GPM. It has a couple different nozzle attachments and turned right on. This was not tested with water.
|
9 |
15759 |
14.00 |
|
ended |
34
more
pics |
 | Strongway 3 ton quick lift service jack. This heavy-duty jack is great for any shop or mechanics home. Works great, easy to pump up and to let down. Lift range is 4" minimum to 18- 5/16" maximum.
|
12 |
10480 |
26.00 |
|
ended |
35
more
pics |
 | Portable torch set, comes complete with hoses, tips and lighters. Approximately 21 high. Appears in good condition.
|
8 |
13367 |
100.00 |
|
ended |
36
more
pics |
 | Autocraft 2 ton hydraulic jack. Capacity is 4,000 lbs and lift up to 13- 3/8". Does work.
|
4 |
9971 |
4.00 |
|
ended |
37
more
pics |
 | Here we have a pair of 2 ton jack stands. In decent used condition. See pictures for measurements.
|
6 |
12078 |
8.00 |
|
ended |
38
more
pics |
 | Here we have a pair of 2 ton jack stands. In decent used condition. See pictures for measurements. One is missing the screw pin that goes in it.
|
3 |
15572 |
4.00 |
|
ended |
39
more
pics |
 | Here we have a Milwaukee Sawzall. In good working condition, body is in used condition. Starts up right away. This is heavy-duty with 6.0amp built motor. Has trigger speed control and includes a bunch of brand new DeWalt wood and metal blades! These are expensive! Also comes with hard metal carrying case. Dont miss out.
|
8 |
12167 |
25.00 |
|
ended |
40
more
pics |
 | Plastic two door free standing storage cabinet with shelves. Approximately 68 high by 27 wide by 15 deep, good condition overall. Could use some cleaning
|
8 |
15312 |
26.00 |
|
ended |
41
more
pics |
 | Plastic and metal 5 foot folding table. Good usable condition. It is quite dirty, not sure how much will clean up, but you can always use a tablecover.
|
7 |
10414 |
8.00 |
|
ended |
42
more
pics |
 | Homemade wooden garage/shop shelf unit. Approximately 48 1/2 high by 72 wide by 12 deep. Has peg board and some hangers on one side. Nice piece. Good condition. This unit does fit on the top of lot 32
|
3 |
15664 |
4.00 |
|
ended |
43
more
pics |
 | Nice narrow 6 foot plastic and metal folding table that is only 18 deep. Good condition.
|
11 |
15664 |
16.00 |
|
ended |
44
more
pics |
 | Nice 5 foot plastic and metal folding table. Good condition.
|
8 |
15664 |
10.00 |
|
ended |
45
more
pics |
 | Porter Cable 1/4 inch narrow crown stapler. Appears in good condition. Comes with instruction manual, case and some staples.
|
7 |
15759 |
12.00 |
|
ended |
46
more
pics |
 | Porter Cable 18 gauge brad nailer. Appears in good condition. Comes with instruction manual, some brads and plastic case.
|
8 |
15759 |
25.00 |
|
ended |
47
more
pics |
 | Portable propane torch set. Appears in good condition. Comes with everything shown and in plastic case.
|
6 |
13442 |
7.00 |
|
ended |
