Auctions50.com
Home - Online Auctions - Register to Bid


Keywords:
See bottom of page to submit bids
Category: TOOLS (20 records) Auction Title: 5816 Better Quality Items from Richie Auction . - Auction begins to end,Thursday December 13th 2018 at 7:00PM ET

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
28

more
pics

T28-1.jpgGasoline powered Back Up Generator made by the DeVilbiss Power Co. Its called the "PowerBack Electric Generator", and is the Model GT5250. DeVilbiss makes high quality products, and this one is rated at 5250 Watts at 6500 Watts surge. The unit is both 120 Volts and 240 Volts. Unit looks exceptionally clean, and the consignor said he bought it new, tried it out, then drained the gas out of it, and stored it ever since. May have been used once or twice but looks brand new and still has the original manual. Still has the original wrapping on the handles. These are expensive units, so dont miss your chance at saving some money. Of course, like most pieces, this carries our 3 days for you to try it out guarantee, so bid with confidence. After that we must pay our consignors, so be sure to check it out. 

16 14383 100.00 110.00
submit bid
57

more
pics

T57-1.jpgThis is a vintage Amprobe Voltage and Amperage Tester. It is made by Amprobe Instrument Company in Lynbrook New York. It works through induction, you simply have to pass the wire between the jaws and it will tell you if current is flowing. It comes with its original leather case. The gauge appears to be in good condition however it has not been tested. The case is a bit rough.

2 12413 2.00 3.00
submit bid
58

more
pics

T58-1.jpgAn original pair of Vintage Iron Woodworking Clamps. They are marked HARTFORD CLAMP CO. EAST HARTFORD, CONNECTICUT. Each clamp is 48 inches long, and in great  anduseful condition. Winning bid gets both Clamps.

6 12314 7.89 8.89
submit bid
59

more
pics

T59-1.jpgThis is a very nice older Craftsman Axe. It likely has the original Hickory handle. It is about a 5-pound axe with an 8in long blade with a 5 inch cutting edge. It is in good used condition.

3 13269 6.00 7.00
submit bid
60

more
pics

T60-1.jpgThis is a brand new in box Wood Chisel Lathe Set. There are 8 pieces including skews, parting tool,and gouges. Never used and ready for service.

4 12314 6.00 7.00
submit bid
61

more
pics

T61-1.jpgThis is a Skilsaw Circular Saw. In good used condition. 2.3 HP. Model 5150.

3 14004 3.00 4.00
submit bid
62

more
pics

T62-1.jpgThis is a Chicago Electric Hammer drill. 1/2" variable speed and reversible. New in original box with paperwork.

4 9490 5.00 6.00
submit bid
63

more
pics

T63-1.jpgThis is a Black and Decker Corded Drill. Model 7190. Looks to be in like new condition.

1 14004 1.00 2.00
submit bid
64

more
pics

T64-1.jpgDremel High Speed Moto Tool with flexible extension, many accessories and parts, and the fitted Carry/storage Case. It is model 400XPR which is variable speed from 5000 to 35,000 RPM. Its tested and working and in good used condition. Be sure to check out the many other Dremel items on the next few lots.

7 12850 35.00 40.00
submit bid
65

more
pics

T65-1.jpgDremel All-Purpose Accessory Kit. It is marked 200 pieces and 120 dollar  value. It looks like all the spaces are filled, with only two small pieces not there. Its model 704-01, and it stands vertically in its see thru clear case. All the pieces look never used, You get all you see for your one bid.

9 12850 40.00 45.00
submit bid
66

more
pics

T66-1.jpgThis is a set of Dremel Blades.  These Multimax blades can be used for wood and metal, and they look like they were never used. There are 4 pieces, and all come in its original storage case.

5 12850 10.00 12.00
submit bid
67

more
pics

T67-1.jpgThis is a four piece lot of Dremel Bits. One 453-chain saw sharpening stone , one 454-chain saw sharpening stone, one 562-tile cutting bit and a four piece set of chain saw sharpening attachments. One bid gets it all.

4 12850 15.00 17.00
submit bid
68

more
pics

T68-1.jpgThis is a lot of high quality small size Modeling Tools. There are 8 items in the lot that includes  5 different pairs of special purpose quality pliers, one hand drill and two tap and drill sets. Everything look to be new, and one bid takes it all.

6 12850 8.00 9.00
submit bid
69

more
pics

T69-1.jpgThis is a Craftsman Pressure Washer. Model # 580.752052. 2550 PSI MAX. 2.3 GPM MAX. Powered by a Briggs and Stratton 675 series engine. With line , wand and extra nozzles. In like new condition but used a few times. As usual you can bid with confidence because this carries our 3 day to be sure it works guarantee. We are the only one that do this. But this unit looks to be in excellent condition.

8 15014 60.00 65.00
submit bid
70

more
pics

T70-1.jpgThis is a set of Craftsman Excalibur Elite Dado blades. New in case with paperwork. Model # 171.32608. Great chance to get a bargain, these are very expensive.

6 11715 11.01 13.01
submit bid
71

more
pics

T71-1.jpgThis is a Ryobi DS1100 Detail Sander. These are very handy tools to have if you do a lot of detail or refinishing work. It looks to be either barely used or unused, and comes with original box and Operators manual. Tested and working.

3 9490 6.00 7.00
submit bid
151

more
pics

T151-1.jpgHere is a great opportunity for the tool collector. We are offering a vintage Union Machinist Tool Chest, completely as found and full of tools. The chest itself I believe dates to the forties or fifties. It has three sliding drawers and they are covered by a movable work surface. The top lifts up to reveal more storage. When the work shelf is in place and you close the lid, it locks the case of type. Inside the case or hundreds of tools as shown in the pictures. They include drill bits, chisels, drafting tools, files, several wooden handled tools and much more. Please try to come in and check this out before you bid. The chest is 14 in tall, 20 inch wide, and 8 inches deep. It shows some light rust and wear, but still works perfectly.

5 13461 12.00 14.00
submit bid
212

more
pics

T212-1.jpgThis is a DeWalt Drill index. The bits from 3/16 inch up are Pilot Point Tips. The set is from 1/16 inch to 1/2 inch. Three small bits are missing.

3 12891 3.00 4.00
submit bid
213

more
pics

T213-1.jpgThis is a 27 piece Deluxe Screwdriver Set made by Chapman Manufacturing Company of Durham Connecticut. It has a nice assortment of slotted, Phillips and Allen bits. The set also includes a ratchet and extension. It is in like new condition and complete.

3 10677 3.00 4.00
submit bid
214

more
pics

T214-1.jpgThis is a Pelican Storage Case. It is an air and water tight box that originally held very high end optics made by Trijicon. There is an air valve on the front that enables you to pressurize the box as needed. Iy is empty and lined with egg crate foam. It measures 8 by 6 by 3.5 inches. It is in very good condition.

10 13359 17.00 19.00
submit bid

Bidder number Password - Increments

 

© 2012, Auctions50.com